# Replace a Bathroom Basin or Kitchen Sink | KL Plumbing Handbook

> What replacing a sink or basin involves: removal, fitting, sealing, waste connection, countertop and tile points, and how long it takes.

URL: https://klplumbing.my/guide/replace-sink-or-basin-what-to-expect/
Last-Modified: 2026-11-15
Author: KL Plumbing Handbook editors

## What a sink or basin swap involves

If you want to replace a kitchen sink or replace a bathroom basin, the plumbing is usually the easy part. The surprises tend to come from the countertop, the tiles and the fit of the new unit.

People swap them for all sorts of reasons: cracks, stains, chips or just a dated look.

We wrote this guide for landed house owners in KL and the Klang Valley who want to know what basin replacement involves before anyone turns up with a spanner. It covers the usual steps, what to check before you buy and how long the job takes. It’s part of the 

Taps and Fixtures section

[/taps-and-fixtures/ →](/taps-and-fixtures/)

.

It does not cover renovation design or tiling choices.

## Before you buy

Measure the existing sink or basin first, then check these five things:

-   **Type:** top-mount (sits on the counter), undermount (fixed below the counter), wall-hung, pedestal or countertop vessel.
-   **Cut-out size** in the countertop, for kitchen sinks and inset basins.
-   **Waste outlet position:** centre or offset, and its height for wall-hung basins.
-   **Tap holes:** how many, and where, or whether the tap mounts on the wall or counter.
-   **Overflow:** some basins have one, some do not. The waste fitting must match.

If the new unit has the same type and size, the job is much simpler.

Don’t assume “standard” means the same size. Spec sheets for undermount stainless sinks sold in the region list cut-outs from about 506 x 486 mm for compact bowls to about 856 x 486 mm for large ones. Many also list a 90 mm waste hole and 35 mm tap holes, so check those against your tap and trap too.

![New undermount kitchen sink resting on a granite countertop beside the old stainless sink lifted out during replacement](/images/content/new-undermount-kitchen-sink-resting-on-a-granite-c.webp)

## The steps

Most swaps follow the same nine steps, in this order.

1.  **Turn off the water** at the angle valves under the sink, or the main supply.
2.  **Disconnect** the tap hoses and the waste trap.
3.  **Remove the old unit.** Cut through old sealant, undo clips or brackets, and lift it out.
4.  **Clean the surface** and check the countertop or wall for damage.
5.  **Prepare the new unit.** Fit the tap and waste outlet to it first, where possible.
6.  **Set it in place** with fresh sealant and its clips or brackets.
7.  **Reconnect** the supply hoses and the waste trap.
8.  **Test.** Run water, fill and drain, and check every joint for drips.
9.  **Seal** the edges neatly with silicone.

> **Pro tip:** Step 5 is much easier on the floor or a workbench than upside down inside a cabinet. Fit the tap and waste before the unit goes anywhere near the counter.

![New basin being sealed with silicone along the wall edge](/images/content/new-basin-being-sealed-with-silicone-along-the-wal.webp)

## Waste connection

The waste is the part most likely to cause trouble later. If the new outlet sits in a different position, the trap may need extending or replacing.

Ask the plumber to fit a new trap and washers rather than reusing old, brittle parts. Our guide on 

water leaking under the kitchen sink

[/guide/leaking-under-kitchen-sink/ →](/guide/leaking-under-kitchen-sink/)

 covers the joints that commonly leak.

A good waste job usually includes:

-   A new trap, not the old one refitted.
-   New washers at every joint.
-   A waste fitting that matches the basin, with or without an overflow.

## Countertop and tile considerations

A top-mount sink is usually the simplest swap, and the other types add risk. Here is how each one behaves:

-   **Top-mount sinks** drop into the cut-out and rest on their rim. They are usually the simplest swap.
-   **Undermount sinks** are fixed below a stone counter with brackets and adhesive. Removal can risk chipping the counter, and the new sink must match the cut-out exactly.
-   **Wall-hung basins** need solid fixings in the wall. Changing the size or position may expose untiled patches or need new fixing points.
-   **Moving the position** of a sink or basin means moving pipes, which usually means hacking.

This handbook does not give renovation advice. If the countertop or tiles need work, ask whether the plumber includes it or whether you need a separate contractor.

## Common surprises, and how to avoid them

Most surprises show up once the old unit is out, so it helps to know them in advance.

-   **The old sink is stuck fast.** Old sealant and corroded clips can make removal slow. Allow extra time on older kitchens.
-   **The angle valves will not shut.** Old valves can seize. If they do, the water has to be turned off at the main supply, and the valves may need replacing.
-   **The waste pipe in the wall is in the wrong place** for the new basin. Small differences can be bridged with an extended trap. Big ones mean moving the pipe.
-   **The new tap does not fit.** Check the tap hole size and the number of holes before buying.
-   **Hidden damage.** A slow leak under the old sink may have damaged the cabinet or the countertop edge. It only shows once the sink is out.

## Time

A like-for-like swap is often done within a few hours. The sealant is what sets the real finish line.

Most sanitary silicones need at least 24 hours before they touch water, and some take up to 72 hours to cure fully. Check the label on the tube, because the cure time varies by product.

| Job | What to expect |
| --- | --- |
| Like-for-like swap | A few hours |
| Countertop work or new fixings | Longer, depending on the repair |
| Moving pipes | Longer, and may need hacking |
| Silicone curing | Usually 24 to 72 hours, so avoid heavy use meanwhile |

## Questions to ask before work starts

Put these to the plumber before you agree a date. Each one heads off a common argument later.

1.  Will the new unit fit the existing cut-out and pipes?
2.  Is a new trap, waste fitting and hoses included?
3.  Who removes and disposes of the old unit?
4.  Is any countertop or tile work included?
5.  What happens if the counter is damaged during removal?
6.  What warranty covers the installation?

Our guide on 

what a written plumbing quote should include

[/guide/plumbing-quote-what-to-include/ →](/guide/plumbing-quote-what-to-include/)

 has a full checklist.

## Landed house and condo notes

**Landed house.** You can schedule the work freely. If you are also changing the tap, consider the water pressure in that room.

**Condo unit.** Check house rules on working hours and debris removal. If moving the sink means moving pipes in the floor or wall, ask management whether there are any restrictions, and make sure nothing touches shared pipes.

## When to call a plumber

Call a plumber to check the fit before you buy, especially for undermount, wall-hung or different-sized units. A quick visit costs far less than returning a sink that doesn’t fit.

Book the job once you have a written quote that covers removal, fitting, new waste parts, sealing and any making good. With that in hand, your basin replacement or kitchen sink swap should have few surprises.

## Questions people ask

Can a new basin use the old pipes?expand\_more

Often, if the waste outlet and supply points are in similar positions. Check the new sink or basin's dimensions and outlet position against the old one before you buy, or ask the plumber to look first.

Will tiles be damaged?expand\_more

Possibly. Swapping a countertop basin usually leaves tiles alone. Changing a wall-hung basin, an undermount sink or moving the position may disturb tiles or the countertop. Ask whether making good is included.

Do I need condo approval?expand\_more

Check your building's house rules with building management. Simple in-unit replacements are often allowed, but there may be rules on noise, working hours, debris disposal and contractor registration.

Should I replace the tap at the same time?expand\_more

It is often a good time to, especially if the tap is old, because the plumber already has access. Make sure the new tap suits the new sink or basin's tap holes.

Keep reading

Learn more about taps and fixtures

Dripping taps, leaking mixers, and replacing sinks and basins.

Open the Taps and Fixtures section

[/taps-and-fixtures/ →](/taps-and-fixtures/)

About the authors

KL Plumbing Handbook editors

The KL Plumbing Handbook editors write plain-language guides on home plumbing problems, repair costs and hiring a plumber for homes in Kuala Lumpur and the Klang Valley. Each guide covers one problem and states the source and date of every cost figure.

Spotted an error? 

Send a correction

[/contact/ →](/contact/)

. See our 

editorial policy

[/editorial-policy/ →](/editorial-policy/)

.

## Related guides

Water Leaking Under the Kitchen Sink Find the leak under your sink: supply hose, tap base, waste trap or sink seal. A dry-and-test method and how to protect the cabinet. Read guide arrow\_forward

[/guide/leaking-under-kitchen-sink/ →](/guide/leaking-under-kitchen-sink/)